ct micro rev 0 .1 (preliminary) proprietary & confidential page 1 oct , 201 4 irp 1608n06 - b50 smd type 94 0nm infrared emitter package outline schematic features ? small double - end package ? viewing angle = ? 75 0 ? high reliability ? good spectral matching to si photo detector ? rohs compliance applications ? i nfrared sensor description the i rp1608n06 - b50 is a ga al as infrared led housed in a miniature smd package . the device has a peak wavelength of 940nm led spectral ly matched with phototransistor or photodiode . cathode anode
ct micro rev 0 .1 (preliminary) proprietary & confidential page 2 oct , 201 4 irp 1608n06 - b50 smd type 94 0nm infrared emitter absolute maximum rating at 25 0 c symbol parameters ratings units notes i f continuous forward current 7 0 ma i fp peak forward current 0. 7 a 1 v r reverse voltage 5 v t opr operating te mperature - 40 ~ +85 0 c t stg storage temperature - 40 ~ +100 0 c t sol soldering temperature 260 0 c 2 p d power dissipation at(or below) 25 free air temperature 119 mw electro - optical characteristics ta = 25c (unless otherwise specified) optical characteristics symbol parameters test conditions min typ max units notes ie radiant intensity i f =20ma 0.4 0.8 1 .3 mw/sr 3 i f = 7 0 ma - 2.5 - p peak wavelength i f =20ma - 940 - nm ? spectral bandwidth i f =20ma - 5 0 - nm 1/2 angle of half intensity i f =20ma - ? 75 - deg electrical characteristics symbol parameters test conditions min typ max units notes v f forward volta ge i f =20ma 1.0 1.2 1.5 v i f =70 ma 1.1 1.34 1.7 i r reverse current v r =5v - - 10 a notes: 1. i fp conditions -- pulse width Q 100s and duty Q 1%. 2. soldering time Q 5 seconds. 3. ie bin rank : bin code b c min 0 .4 0.65 max 0.8 1.3
ct micro rev 0 .1 (preliminary) proprietary & confidential page 3 oct , 201 4 irp 1608n06 - b50 smd type 94 0nm infrared emitter typical characteristic curves
ct micro rev 0 .1 (preliminary) proprietary & confidential page 4 oct , 201 4 irp 1608n06 - b50 smd type 94 0nm infrared emitter typical characteristic curves
ct micro rev 0 .1 (preliminary) proprietary & confidential page 5 oct , 201 4 irp 1608n06 - b50 smd type 94 0nm infrared emitter package dimension all dimensions are in mm, unless otherwise stated recommended soldering mask all dimensions are in mm, unless otherwise stated ordering information p art number description quantity irp 1608n06 - b50 tape & reel 4 000 pcs
ct micro rev 0 .1 (preliminary) proprietary & confidential page 6 oct , 201 4 irp 1608n06 - b50 smd type 94 0nm infrared emitter reel dimension all dimensions are in mm, unless otherwise stated tape dimension all dimensions are in mm, unless otherwise stated
ct micro rev 0 .1 (preliminary) proprietary & confidential page 7 oct , 201 4 irp 1608n06 - b50 smd type 94 0nm infrared emitter reflow profile profile feature pb - free assembly profile temperatu re min. (tsmin) 150c temperature max. (tsmax) 200c time (ts) from (tsmin to tsmax) 60 - 120 seconds ramp - up rate (t l to t p ) 3c/second max. liquidous temperature (t l ) 217c time (t l ) maintained above (t l ) 60 C 150 seconds peak body package temperatur e 260c +0c / - 5c time (t p ) within 5c of 260c 30 seconds ramp - down rate (t p to t l ) 6c/second max time 25c to peak temperature 8 minutes max.
ct micro rev 0 .1 (preliminary) proprietary & confidential page 8 oct , 201 4 irp 1608n06 - b50 smd type 94 0nm infrared emitter disclaimer ct micro reserves the right to make changes without further notice to any pr oducts herein to improve reliability, function or design. ct micro does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. ______________________________________________________________________________________ ct micro are not authorized for use as critical components in life support devices or systems without express written approval of ct micro international corp ora tion . 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instruction for use provided in the label l ing, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support de vice or system, or to affect its safety or effectiveness.
|
